APC Power-Saving Back-UPS Pro 1300

APC Power-Saving Back-UPS Pro 1300

BR1300G Features

Key Features

Run time for loadW

6m 24s

Max. Capacity Used

100%

Output power capacity

780 Watts / 1.3kVA

Output Connections

(5) NEMA 5-15R (Surge Protection)

(5) NEMA 5-15R (Battery Backup)

Nominal Output Voltage

120V

Nominal Input Voltage

120V

Input Connections

NEMA 5-15P

Cord Length

6ft (1.8meters)

APC Power-Saving Back-UPS Pro 1300

High Performance Computer and Electronics UPS for Premium Power Protection

Includes: CD with software, USB cable, User manual

  • Building Wiring Fault Indicator

    This LED informs users of potentially dangerous wiring problems in the wall circuit.

  • Hot-swappable batteries

    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

  • Lifetime data recovery warranty

    Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.

Back-UPS Pro Features & Benefits

Serviceability

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Simple battery replacement

Increases UPS availability by allowing quick, easy battery replacement.

Availability

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Customizable voltage-transfer points

Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Customizable voltage sensitivity

Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Cold-start capable

Provides temporary battery power when the utility power is out.

Transformer-block spaced outlets

Protect equipment with input transformer blocks without blocking access to other receptacles.

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Marketing features

Battery-protected and surge-only outlets

Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Boost Automatic Voltage Regulation (AVR)

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Manageability

LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

USB connection

Use your PC to access additional power protection and management features for your UPS via a USB Port.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Safety

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Protection

Battery and surge protected outlets

Back up and protect your hardware and data during power outages, surges and spikes.

Dataline surge protection

Provides protection of connected equipment from power surges on the data lines.

Surge only outlets

Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
 

  • Technical Specifications

    Print

    Download

    Output

    Max Configurable Power (Watts)

    780 Watts / 1.3kVA

    Output Frequency (sync to mains)

    50/60 Hz +/- 3 Hz Sync to mains

    Topology

    Line interactive

    Waveform type

    Stepped approximation to a sinewave

    Transfer Time

    8 ms typical : 12 ms maximum

    Input

    Input frequency

    50/60 Hz +/- 3 Hz Auto-sensing

    Batteries & Runtime

    Battery type

    Lead-acid battery

    Included Battery Modules

    1

    Typical recharge time

    8hour(s)

    Replacement Battery

    APCRBC124

    Expected Battery Life (years)

    3 - 5

    RBC Quantity

    1

    Battery Charge Power (Watts)

    27 Watts

    Battery Volt-Amp-Hour Capacity

    187

    Runtime

    View Runtime Graph

    View Runtime Chart

    Efficiency

    View Efficiency Graph

    Communications & Management

    Interface Port(s)

    USB

    Control panel

    Multifunction LCD status and control console

    Audible Alarm

    Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

    Surge Protection and Filtering

    Surge energy rating

    354Joules

    Data Line Protection

    Cable modem/video protection, RJ45 network line - 10/100/1000 Base-T Ethernet

$220.00Price